Stratasys F123 Series Printers

Smarter and Easier Prototyping

The new Stratasys F123 Series is easy to operate and maintain for all levels of experience. And, it’s adept at every prototyping stage, from concept verification to design validation to functional performance.

The most commonly used CAD file formats can be imported directly into GrabCAD. The three printers in the platform, the Stratasys F170, F270 and Stratasys F370, support a broad range of capabilities and budgets for every stage of prototyping.

Key Features

Minimal setup means you can simply plug and play to give your entire office access to professional 3D printing.

Auto-calibration ensures you spend less time troubleshooting and more time prototyping.

Fast and easy material swaps help maximize your design team’s productivity.


View a Demonstration on Stratasys F123 Series Printers



F123 3D Printer Series makes rapid prototyping more accessible and productive.

Specifications
Feature Specification
System size and weight 1626 x 864 x 711 mm (64 x 34 x 28 in.) 227 kg (500 lbs) with consumables
Noise specification 46 dB maximum during build, 35 dB when idle
Model Capabilities Stratasys F170
Maximum Build Size (XYZ): 254 x 254 x 254 mm (10 x 10 x 10 in.)
Model Materials: PLA*, ABS-M30™, ASA, QSR support material

Stratasys F270
Maximum Build Size (XYZ): 305 x 254 x 305 mm (12 x 10 x 12 in.)
Model Materials: PLA*, ABS-M30, ASA, QSR support material

Stratasys F370
Maximum Build Size (XYZ): 355 x 254 x 355 mm (14 x 10 x 14 in.)
Model Materials: PLA*, ABS-M30, ASA, PC-ABS, QSR support material

Layer Thickness 0.330 mm (0.013 in.)
ABS, ASA, PC-ABS

0.254 mm (0.010 in.)
PLA, ABS, ASA, PC-ABS

0.178 mm (0.007 in.)
ABS, ASA, PC-ABS

0.127 mm (0.005 in.)
ABS, ASA, PC-ABS

Accuracy Parts are produced within an accuracy of +/- .200 mm (.008 in), or +/- .002 mm/mm (.002 in/in), whichever is greater
Material delivery options Stratasys F170 = 2 material spool bays, 1 for model, 1 for support located in a drawer on the front of the unit
Stratasys F270/F370 = 4 material spool bays, 2 for model, 2 for support located in a drawer on the front of the unit
Network Connectivity Wired: TCP/IP protocols at 100 Mbps minimum 100 base T, Ethernet protocol, RJ45 connector
Wireless: IEEE 802.11n, g, or b; Authentication: WPA2-PSK, 802.1x EAP; Encryption: CCMP, TKIP
Software GrabCAD Print (download): Stratasys F170, F270 and F370
Insight software license: Stratasys F370 only
System Requirements Windows 7, 8, 8.1 and 10 (64bit only) with a minimum of 4GB RAM (8GB or more recommended)
Operating Environment Operating: Temperature: 59-86ºF (15-30ºC), Humidity: 30-70% RH
Storage: Temperature: 32-95ºF (0-35ºC), Humidity: 20-90% RH
Power Requirements 100–132V/15A or 200–240V/7A. 50/60 Hz
Regulatory Compliance CE, FCC, EAC, EMC (low-voltage directive), TUV, FCC, RC, RCM, RoHs, WEEE, Reach